Copper-Nickel Strip / Coil

Request a Quote

Fuel Cell Interconnect Alloys
Nickel Strip
Stainless Steel Strip
Titanium Strip

Buy Mill-Direct from
Stocking Suppliers / Custom re-rollers of
Strip / Foil / Coil
in:
Copper Nickel Alloys

DFARS Compliant
Mill Certs.

Minimum order
as low as 50 lbs.

Call in CT:
1-860-423-1017

Cu-Ni Alloys in Strip Coil

Industry Standards

Gauges

Copper Nickel Alloy 706 ^{Cupronickel CuNi 90/10} Copper-Nickel-Iron Alloy Annealed, 1/8 Hard, 1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard	UNS C70600 ASTM B122 CDA706 Cupro Nickel Cu90-Ni10	Strip from .003" Thin to .064" Thick slit up to 12.5" Wide from Stock or can produce up to .125" Thick and 14" Wide by coil
Copper Nickel Alloy 715 ^{Cupronickel CuNi 70/30} Copper-Nickel-Iron Alloy Annealed, 1/8 Hard, 1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard	UNS C71500 ASTM B122 CDA715 Cupro Nickel Cu70-Ni30 MIL-C-15726	Strip from .003" Thin to .064" Thick slit up to 12.5" Wide from Stock or can produce up to .125" Thick and 14" Wide by coil

Low Ohm Resistance Alloys ^{CuNi Alloy 30 / 30 Ohm Alloy CuNi Alloy 60 / 60 Ohm Alloy CuNi Alloy 90 / 90 Ohm Alloy CuNi Alloy 180 / 180 Ohm Alloy CuNi Alloy 294 / 294 Ohm Alloy CuNi Alloy 300 / 300 Ohm Alloy} Copper-Nickel Alloys Annealed, 1/8 Hard, 1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard	ASTM B267-90 ^{Cu98-Ni2 Cu94-Ni6 Cu90-Ni10 Cu77-Ni23 Cu55-Ni45 Cu55-Ni45}	Strip from .003" Thin to .094" Thick slit up to 12.5" Wide from Stock or can produce up to .125" Thick and 14" Wide by coil
Niclal Alloy 38 ^Manganin ^{Grade 13} Copper-Manganese-Nickel Cupro-Manganese-Nickel Annealed, 1/8 Hard, 1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard	^Cu ^86-Mn10-Ni4 ^Cu ^MnNi	Strip from .003" Thin to .125" Thick slit up to 12.5" Wide from Stock or can produce up to 14" Wide by coil
Niclal Alloy 42 ^Manganin Copper-Manganese-Nickel Cupro-Manganese-Nickel Annealed, 1/8 Hard, 1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard	^Cu ^85-Mn11-Ni4 ^Cu ^MnNi	Strip from .003" Thin to .125" Thick slit up to 12.5" Wide from Stock or can produce up to 14" Wide by coil
Niclal Alloy 48 ^Manganin ^{Grade 12} Copper-Manganese-Nickel Cupro-Manganese-Nickel Annealed, 1/8 Hard, 1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard	^Cu ^83-Mn13-Ni4 ^Cu ^MnNi	Strip from .003" Thin to .125" Thick slit up to 12.5" Wide from Stock or can produce up to 14" Wide by coil

more STRIP / FOIL / COIL: Nickel | Stainless | Titanium

Strip / Coil Suppliers since 1999
About Us

Call in CT:
1-860-423-1017

Request a Quote

Note: MANGANIN is a registered trademark of Isabellenhutte Heusler GmbH & Co.
Trade names are provided as a reference to industry standards. In some cases, multiple manufacturers hold trademarks
on variations of the name, although they satisfy the same UNS standards. Properties provided are not to be construed as specifications.
Availability is subject to change without notice.
www.Titanium-Metals.com is owned and operated by John Vizard. Copyright 2003 - 2025.